Show production programme

Trurnit-Clout nails

Clout nails
Clout nails
with flat head

Clout nails (also known as roofing or felt nails) possess an especially large flat head, making them suitable for materials, such as roofing felt, pressboard, plastic and plaster boards through which a nail with a smaller head would sink.

Two head forms (A+B) are available, describing the diameter of the nail head:
Form A:     Ø head = approx. 3 x d shank
Form B:     Ø head = approx. 4 x d shank

Clout nails are not suitable for machine processing.

 

Dimensions and variants

IRON STEEL (hot-dip galvanized - FORM A)
Dimension Packing unit Variant / Item No.
d
mm
L
mm
d head
mm
kg/box weight in kg
per 1.000 pcs
hot-dip galvanised
2,0 20 5,0-6,0 2,5 0,55 13 20 01 020
2,2 25 * 6,5-7,5 2,5 0,83 13 25 01 025
2,2 30 * 6,5-7,5 2,5 0,95 13 22 01 030
2,2 35 * 6,5-7,5 2,5 1,05 13 22 01 035
2,5 25 7,0-8,0 2,5 1,00 13 25 01 025
2,5 30 * 7,0-8,0 2,5 1,15 13 25 01 030
2,5 35 * 7,0-8,0 2,5 1,20 13 25 01 035
2,8 25 8,0-9,0 2,5 1,30 13 27 01 025
2,8 30 8,0-9,0 2,5 1,35 13 28 01 030
2,8 35 8,0-9,0 2,5 1,50 13 28 01 035
2,8 40 8,0-9,0 2,5 1,80 13 28 01 040

*Dimensions are outside of DIN 1160

IRON STEEL (hot-dip galvanized - FORM B)
Dimension Packing unit Variant / Item No.
d
mm
L
mm
d head
mm
kg/box weight in kg
per 1.000 pcs
hot-dip galvanized
2,0 16 * 7,5-8,0 2,5 0,60 13 20 02 020
2,0 20 7,5-8,0 2,5 0,60 13 20 02 020
2,2 25 * 8,0-8,5 2,5 0,85 13 25 02 025
2,2 30 * 8,0-8,5 2,5 1,00 13 22 02 030
2,2 35 * 8,0-8,5 2,5 1,10 13 22 02 035
2,5 25 9,0-10,0 2,5 1,05 13 25 02 025
2,5 30 * 9,0-10,0 2,5 1,20 13 25 02 030
2,5 35 * 9,0-10,0 2,5 1,25 13 25 02 035
2,8 25 10,0-11,0 2,5 1,35 13 28 02 025
2,8 30 10,0-11,0 2,5 1,40 13 28 02 030
2,8 35 10,0-11,0 2,5 1,60 13 28 02 035
2,8 40 10,0-11,0 2,5 1,90 13 28 02 040

* Dimensions are outside of DIN 1160

STAINLESS STEEL (FORM A)
Dimension Packing unit Variant / Item No.
d
mm
L
mm
d head
mm
kg/box weight in kg
per 1.000 pcs
1.4301 (A2)
AISI 304
2,0 20* 7,0-7,5 2,5 0,55 31 25 01 035
2,5 25 7,0-7,5 2,5 1,00 31 28 01 030
2,8 25* 7,5-8,0 2,5 1,30 31 28 01 035
2,8 40* 7,5-8,0 2,5 1,90 31 28 01 040
2,8 45* 7,5-8,0 2,5 2,15 31 28 01 045
2,8 50* 7,5-8,0 2,5 2,40 31 28 01 050

* Dimensions are outside of DIN 1160

Due to the inferior deformability of stainless steel wire compared with iron wire,
only Form A is offered in the stainless steel variant.

© 2018 • Friedr. Turnit GmbH